Our services
Terrace & Tank
Waterproofing
Bathroom
Waterproofing
Interior
Waterproofing
Exterior
Waterproofing
Why choose us?
Professional Expertise
No guessing work is involved, our team of experts accurately identifies leak sources and uses the best products and techniques to fix them.
Quality Materials
Stay worry-free about product quality as we use only ISO-certified products from renowned brands specializing in the waterproofing industry.
Comprehensive Service
You can relax knowing that our full-service covers everything from waterproofing to civil work and painting, ensuring a hassle-free experience for you.
Waterproofing Causes & Treatments
Bathroom WaterproofingTerrace & Tank WaterproofingInterior WaterproofingExterior WaterproofingCracks & Joints
Tile Gaps & Joints Waterproofing:
Cause: Water can leak into walls through cracks in tiles, broken tiles, and gaps around bathroom pipes.
Treatment:
1. Wait a day for tiles to set, remove spacers, and clean joints.
2. Mix resin, hardener, and filler until smooth.
3. Press the grout into joints, ensuring full coverage.
4. Remove excess grout and clean joints with a damp sponge.
New Bathroom Waterproofing:
Cause: Addressing a bathroom leakage after tile installation and fixture setup is costly and time-consuming.
The most cost-effective time for waterproofing is during initial construction.
Treatment:
1. Add waterproofing ad Mixture & repair polymer to cement for enhanced strength and water resistance.
2. Apply a 3-layer waterproof membrane using SmartCare multipurpose polymer and tile adhesive mix.
3. Fix tiles with the multipurpose polymer and tile adhesive mix.
4. Fill tile joints with cement or epoxy-based grouts.
Sunshades & Parapet Walls Waterproofing:
Cause: Weather changes and vibrations cause sunshades and parapet walls to expand and contract, leading to cracks and water leaks.
Waterproofing Treatment:
1. Clean & Inspect: Remove loose debris (paint, dust, etc.) and check for cracks.
2. Prime & Seal: Apply a diluted self-priming acrylic coat by brush. For cracks up to 3mm, use a flexible crack sealant. For cracks larger than 3mm, use a textured acrylic filler.
3. Acrylic Coating: Apply two coats of acrylic sealant with drying time between each.
4. Drying Time: Allow 4-6 hours drying time between coats for optimal waterproofing.
Ceiling Waterproofing:
Cause: Harsh weather and wear-and-tear can cause leaks in your terrace ceiling.
Waterproofing Treatment:
1. New Construction: Add waterproofing admixture to the concrete mix for built-in protection.
2. Existing Leaks (Repair):
- Clean & Inspect: Remove debris and check for cracks.
- Prime & Seal Cracks: Apply diluted acrylic coat, then seal cracks.
- Acrylic Coating: Apply 2 coats of acrylic sealant with drying time between each.
Terrace Tiles Waterproofing:
Cause: Poorly filled cracks and gaps in tiles can lead to leaks.
Treatment:
1. Clean & Inspect: Remove loose material (paint, dust, grease, bitumen) with wire brush/water jet. Check all surfaces, especially corners and channels, for cracks with a hammer.
2. Prime & Seal Cracks: Apply Tile primer (brush only). Fill cracks (up to 3mm with sealant, 3-10mm with textured filler).
3. Acrylic Coating: Apply two coats of Acrylic with drying time between each (4-6 hours).
Algal Growth Stop Waterproofing:
Cause: Rainwater and dirty water left on the terrace can cause ugly black spots and slimy algae to grow.
Treatment:
1. Clean & Inspect: Remove black spots and algal growth with wire brush/water jet. Check all surfaces, especially corners and channels, for cracks with a hammer.
2. Seal Cracks: Apply diluted self-priming Acrylic coat (brush only). Fill cracks (up to 3mm with sealant, 3-10mm with textured filler).
3. Acrylic Coating: Apply two coats of Acrylic with drying time between each (4-6 hours).
Garden/Flower Pots & Open Reinforcement:
Cause: Terrace gardens, AC units, and open reinforcement bars can cause leaks due to water buildup and damage.
Treatment:
1. During Construction:
Use waterproofing Admixture as an additive in the concrete mix during construction. This creates a waterproof barrier within the concrete itself.
2. For Existing Leaks (Repair):
Clean & Inspect: Remove loose material (paint, dust, grease, bitumen) with wire brush/water jet. Check all surfaces, especially corners and channels, for cracks with a hammer.
Prime & Seal Cracks: Apply Tile primer (brush only). Fill cracks (up to 3mm with sealant, 3-10mm with textured filler).
Acrylic Coating: Apply two coats of Acrylic with drying time between each (4-6 hours).
Water Tank Waterproofing:
Cause: Water tanks and cement structures can crack and leak due to water pressure, age, and changing temperatures.
Treatment:
1. Clean surface, removing loose debris, and dampen it.
2. Mix Base (850gm), Hardener (900gm), and Filler (3.25kg) thoroughly.
3. Slowly add 750-800ml water while mixing until a brushable consistency is achieved.
4. Apply 1st coat with a brush, let it dry for 4 hours.
5. Apply 2nd coat perpendicular to the 1st, let it dry for 4 hours.
6. Epoxy Triblock cures in 7 days, avoid water contact during this time.
Switchboard Gap Waterproofing:
Cause: Mismatched fillers in gaps around switchboards can ruin the wall’s look.
Treatment:
1. Prepare the area: Clean the surface thoroughly and apply a primer if needed.
2. Apply sealant: Dispense sealant into the gap using a sealant gun, smoothing it out for a neat finish.
3. Build up: For wider gaps, apply additional layers of sealant after the first has dried.
4. Match the finish: Apply a primer and paint to blend the sealed area with the wall.
Window & Door Frames Waterproofing:
Cause: Gaps around frames can cause water seepage and waterproofing problems.
Treatment:
1. Clean and prime: Prepare the surface by cleaning and applying primer if needed.
2. Apply sealant: Use a sealant gun to fill the gap with neutral silicon sealant.
3. Smooth and shape: Tool the sealant for a neat finish.
4. Finish: Apply a second coat if necessary, then prime and paint to match.
Balcony Slab/Tiles Waterproofing:
Cause: Poor adhesion between cement and tiles can lead to tile damage and water seepage.
Treatment:
1. Prepare surface: Clean balcony and mix adhesive smoothly.
2. Apply adhesive: Spread 3-6mm adhesive on a 1 sqm area, comb for better bond.
3. Place tiles: Press tiles firmly, use spacers, remove excess adhesive.
4. Finish: Tap tiles gently, grout after 24 hours.
Kitchen Sink & Sewage Waterproofing:
Cause: Gaps around sinks can lead to leaks.
Treatment:
1. Prepare surface: Clean, dry, and prime porous surfaces as needed.
2. Prepare sealant: Cut nozzle and tip according to joint size.
3. Apply sealant: Dispense sealant using a gun, smooth with a pallet knife or wet finger.
4. Finish: Allow drying, apply second coat for butt joints, prime before painting.
Grill Fittings Wateproofing:
Cause: Water can seep through gaps between balcony floors and grills during rainfall.
Treatment:
1. Prepare gap: Create a “V” groove, clean, and prime gap edges.
2. Apply first coat: Fill the crack with diluted filler, and let dry.
3. Apply base coat: Fill the crack with undiluted filler, and spread 3cm on each side.
4. Finish: Apply the second coat of undiluted filler, and let dry.
Damp Patches on Walls:
Cause: Wind-driven rain can seep through exterior walls, causing interior dampness.
Treatment:
1. Remove loose paint, dust, grease and bitumen coatings (wire brush, water jet, vacuum).
2. Fill cracks: under 3mm (Crack Seal), up to 10mm (Textured Crack Filler).
3. Apply 1 coat waterproofing base coat diluted 10% with water (dry for 4 hours).
4. Apply 1 coat undiluted waterproofing base coat
5. Paint: Apply 2 coats of exterior emulsion paint.
Skirting Area & Efflorescence:
Cause: Waterproofing problems, particularly in ground-level skirting areas, can arise from various sources: rainfall, gardening activities, plumbing malfunctions, or rising groundwater. The presence of dissolved salts in groundwater may lead to efflorescence, a white crystalline deposit on surfaces.
Treatment:
1. Ensure the brick area is clean, strong, and fully cured.
2. Remove the affected plaster around the bricks.
3. Repair small cracks with SmartCare Crack Seal, use mortar for larger ones.
4. Apply Damp Block 2K in two perpendicular coats on the dry surface.
5. Apply waterproofing Admixture screed within 24-48 hours for bricks.
6. Allow 3-5 days curing for complete waterproofing.
Dampness:
Cause: Dampness in bathroom walls can originate from leaks in pipes, sanitary connections, or wall cracks.
Treatment:
1. Prepare wall: Clean, repair cracks, and fix leaks.
2. Treat dampness: Apply damp-proof layers followed by waterproofing putty.
3. Treat good condition: Apply Hydroloc Xtreme and waterproofing putty.
4. Finish: Allow drying, sand, and paint.
Ceiling:
Cause: Water seepage through terrace slabs can occur due to inadequate slope, blocked drainage systems, or cracks in the slabs.
Treatment:
1. Clean & Inspect: Remove loose material (paint, dust, grease, bitumen) with wire brush/water jet. Check all surfaces, especially corners and channels, for cracks with a hammer.
2. Prime & Seal Cracks: Apply diluted self-priming Acrylic coat (brush only). Fill cracks (up to 3mm with sealant, 3-10mm with textured filler).
3. Acrylic Coating: Apply two coats of Acrylic with drying time between each (4-6 hours).
Damp Patches Waterproofing:
Cause: Building structures can experience dampness due to factors like leaky pipes, roof damage, rainwater infiltration, condensation buildup, or moisture rising from the ground.
Treatment:
1. Prepare surface: Remove loose paint, dust, grease, and old bitumen coatings. Fill minor cracks.
2. Apply first damp proof coat: Apply a diluted damp proof coat (10% water).
3. Apply second damp proof coat: Apply an undiluted damp proof coat.
4. Finish: Apply two coats of exterior emulsion paint.
Waterproofing Primer:
Cause: External factors such as rain, humidity, or garden activities can lead to moisture penetration in exterior walls.
Treatment:
1. Prepare surface: Apply SmartCare Damp Sheath Exterior as a waterproofing primer, clean surface, and fill cracks.
2. Apply first primer coat: Apply a diluted exterior primer coat.
3. Apply second primer coat: Apply an undiluted exterior primer coat.
4. Finish: Apply two coats of exterior emulsion paint.
Swimming Pool & Water Tank Waterproofing:
Cause: Inadequate waterproofing can cause water to leak from swimming pools and similar structures.
Treatment:
1. Mix materials: Thoroughly mix Base, Hardener, and Filler. Gradually add water to achieve a brushable consistency.
2. Apply first coat: Apply the mixture as the first coat using a brush. Let it dry for 4 hours.
3. Apply second coat: Apply the second coat perpendicular to the first. Let it dry for 4 hours.
4. Curing: Allow the Epoxy Triblock to cure for 7 days, avoiding water contact during this period.
Waterproofing Against Temperature and Weather Effects :
Cause: Temperature fluctuations cause materials to expand and contract differently, leading to potential damage.
Treatment:
1. Identify the Issue: Cracks and leaks in sunshades and parapets can cause structural damage and aesthetic problems.
2. Implement the Solution: Apply damp sheaths to create a waterproof barrier.
3. Prepare the Surface: Clean thoroughly and fill cracks with appropriate sealants.
4. Application Process: Apply primer, sealer, and finish coats for long-lasting protection.
Surface Conditions:
Cause: Rough exteriors vulnerable to weather and temperature changes.
Treatment:
1. Remove loose paint, dust, grease, bitumen coatings (wire brush, water jet, vacuum).
2. Fill cracks: under 3mm (Crack Seal), up to 10mm (Textured Crack Filler).
Design and Construction Gaps Waterproofing:
Cause: Gaps around window and door frames during construction.
Treatment:
1. Prepare the Surface: Clean thoroughly, ensuring it’s dry and free from contaminants. Prime porous surfaces.
2. Apply Sealant: Cut the cartridge nozzle, dispense sealant, and smooth it with a tool.
3. Multiple Coats: For butt joints, apply a second coat after the first dries.
4. Priming: Prime before applying a water-based paint for added durability.
Waterproofing To Fix Aesthetic Issues:
Cause: Visible gaps around switchboards.
Treatment:
1. Prepare the Surface: Clean thoroughly, ensuring it’s dry and free from contaminants. Prime porous surfaces for better adhesion.
2. Apply the Sealant: Cut the sealant nozzle correctly, dispense evenly, and smooth out for a seamless finish.
3. Create a Strong Bond: For specific joints, apply multiple coats for enhanced durability.
4. Protect Your Sealant: Apply a primer before the top coating to extend the sealant’s lifespan.
Waterproofing To Treat Painted Surface Cracks:
Cause: Shrinkage or vibrations leading to cracks in painted surfaces.
Treatment:
1. Prepare the Crack: Clean and widen the crack into a “V” shape to ensure proper adhesion. Apply primer suited for the area (interior or exterior).
2. Apply Crack Seal: Apply two coats of Crack Seal, allowing the first coat to dry for 6 hours before applying the second.
3. Level and Finish: Smooth the repaired area with wall putty and then prime and paint as usual to match the surrounding wall.
Steps Involved In Waterproofing
Our Trusted Partners
Customer Feedback
Rajesh K
Madhavaram
Evolve Decors terrace cool painting reduced the heat in our home. I liked their approach and highly recommend their service
Syed Hussain
Velacherry
Our terrace had water leakage from algae growth but Evolve Decors cleaned and waterproofed it completely. Now there is no more leakage.
Janaki
Anna Nagar
We faced high heat during summer and slight seepage during rains, after Evolve Decors installed terrace tiles both issues were resolved. Thanks Evolve Decors.
Janaki
Anna Nagar
Finally Evolve Decors waterproofing service stopped our bathroom leakage completely after multiple failed attempts by other vendors.
Our Pricing Starts From
